Decided to take xgman's advice and try running my TeamGroup Micron modules with low voltage. The BIOS I'm using only goes down to 2.5v, so that's where I set VDimm. Modules were Prime-stable at 258MHz with 3-3-3-8 timings. They can probably do 250MHz with less than 2.5v.
Once I switch to watercooling, the goal will be to run Prime-stable at 300X10 with the 166 divider. This would give me a RAM speed of 250MHz. So I would be able to run VDimm at just 2.5v.
No comments:
Post a Comment